[fibosearch]

Rabintex Full Face Plates - SAPI MUlTI HIT Front and Back Curved Plates for Bullet Proof Vest - Level III (3) Protection

SKU: MD_PLFF Category:

Rabintex Full Face Plates - SAPI MUlTI HIT Front and Back Curved Plates for Bullet Proof Vest - Level III (3) Protection

Price: 

$934.95

Out of stock

Description
Specifications

The Small Arms Protective Insert (SAPI) is a ceramic trauma plate used by the United States Armed Forces.The Kevlar Interceptor vest itself is designed to stop projectiles up to and including 9×19mm Parabellum submachine gun rounds, in addition to fragmentation. To protect against higher-velocity rifle rounds, SAPI plates are needed.

Technical details:

  • Ballistic material: Ceramic;Composite
  • Protection level is III according to NIJ interim requirements 0101.04.

Stand Alone:

This plate is designed to achieve NIJ Level III protection and is a “Stand Alone” plate. “Stand Alone” plates are designed and tested to defeat ballistic threats using the plate only.

No ballistic vest is required, as all the ballistic energy and fragments are stopped in the plate. These plates are usually reserved for tactical operations or anti-terrorist work where the ammunition threat is unknown, or if the wearing of a vest is considered too cumbersome.

Rabintex Full Face Plates - SAPI MUlTI HIT Front and Back Curved Plates for Bullet Proof Vest - Level III (3) Protection 7

Ballistic levels:

Bullet proof vests are designed to ‘trap’ and slow bullets down as they attempt to pass through the vest. Bullet Proof Vests come in two different types; hard and soft. The ‘soft’ armors are designed to protect against most handgun and small arms ammunition, whereas ‘hard’ armors are designed to stop high caliber and armor piercing rounds.

The NIJ classifies all armors in the following levels:

NIJ Level IIa NIJ Level II NIJ Level IIIa NIJ Level III NIJ Level IV
Areal Density 3.5 kg/m 4.2 kg/m 5.9 kg/m 25.9 kg/m 32.5 kg/m
.22mm short x x x x x
.9mm x x x x x
.45mm x x x x x
.380mm x x x x x
.38mm x x x x x
.22mm long x x x x
.44 Magnum x x x
.30 Carbine x x
5.56mm x x
7.62mm NATO x x
.30-06 x x
.30 Armour Piercing (M2 AP) x

 

Dimensions:

  • Size Front: 412 X 340 mm ± 5.
  • Size Back: 370 X 410 mm ± 5.
  • Weight Front: 3.22 Kg ± 0.1.
  • Weight Back: 3.75 Kg ± 0.1.

Additional Information:

  • Multi- Curved
  • Cover: Polyester / Cordura

Additional information

Manufacturer

Color

Manufactured at

Copyright © 2024. All Rights Reserved to ZFI-Inc.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram